Benco Sales > Metal Strippers

Benco Sales metal (aircraft) strippers are extremely aggressive.  In many cases they will strip the hardest finishes from metal in only 3-5 minutes making them extremely cost-effective. Our industrial powder coat remover provides fast removal of epoxy, paint, polyesters, nylon, catalyzed finishes and electroplate. Available in 55 and 30 gallon drums and convenient 5 gallon pails for some products. YOU MUST ALWAYS USE PROPER SAFETY GEAR. Please see our Stripping Procedures & Best Practices page before using.

 

—All orders of 30 gallons or more qualify to be shipped on the Benco trucks with only a nominal fuel charge. Orders of less than 30 gallons are shipped via FedEx Ground or USPS and must be prepaid.

More Info

Strip rims in minutes, not hours! B17 is the original “bomb-of-strippers”, imitated, never duplicated—the world’s most aggressive metal stripper. Used extensively in the automotive industry for quickly and inexpensively removing tough epoxy coatings and powder coat for rim and wheel stripping. Removes the toughest finishes from metal lawn furniture, washing machines, road machinery, tractor parts and heavy industrial equipment. Also used to clean industrial hooks and racks for enhanced electro-conductivity.

  • DESCRIPTION
  • SPECIFICATION
  • CONTAINERS

DESCRIPTION

Benco B17

  • Liquid wheel stripper, non-flammable, water bath to water rinse.
  • Extremely aggressive stripping action on all coatings.
  • Effective on most powder coat polyesters and nylons, catalyzed finishes, epoxies, electroplate as well as conventional paints.
  • Not for use on zinc or magnesium surfaces.
  • Apply by submerging item into stripper.

SPECIFICATION

  • Specific Gravity—1.195 (9.97 lbs. / gal)
  • Percent Volatile—>95%
  • VOC Content—179 grams/liter      (1.59lbs./gal)
  • Boiling Point—104 degrees F
  • Freeze Point—Less than -40 F
  • Flash Point—N / A

CONTAINERS

Available in 5, 30, 55 and 275 gallon totes.

Benco trucks service more than 95% of cities in the 48 contiguous states. See our Truck Schedule. All items are delivered on our regularly scheduled Benco trucks on orders of 30 gallons or more of strippers and/or finishes. Freight charges apply. Restrictions on semi-truck access should be discussed with our customer service department to reach a convenient delivery. Orders that need to be expedited, that cannot wait for the Benco truck schedule, can be shipped by common carrier. Common carrier rates will apply. These shipments will be prepaid only.

Smaller orders are shipped Federal Express ground only and/or United States Postal Service. These orders will be prepaid only.

International shipments require special handling. Call for assistance.

Notice: Methylene Chloride based products are for industrial use only. Use only in well ventilated area with proper protective equipment.

More Info

B14 is a powder coat stripper perfect for more sensitive metals like zinc, magnesium and thin aluminum parts. Often used for refinishing park benches in theme parks and other high volume applications.

  • DESCRIPTION
  • SPECIFICATION
  • CONTAINERS

DESCRIPTION

Benco B14

  • Liquid, non-flammable, water bath to water rinse.
  • Effective on most powder coat polyesters and nylons, catalyzed finishes, epoxies, electroplate as well as conventional paints.
  • Apply by brush or immersion. (Follow B17 procedures)
  • Is safe to use on aircraft for stubborn surfaces.

SPECIFICATION

  • Specific Gravity—1.195 (10 lbs./gal)
  • Percent Volatile—>95%
  • VOC Content—180 grams/liter      (1.5lbs./gal)
  • Boiling Point—104 degrees F
  • Freeze Point—Less than -40 F
  • Flash Point—N / A

CONTAINERS

Available in 5, 30, 55 and 275 gallon totes.

Benco trucks service more than 95% of cities in the 48 contiguous states. See our Truck Schedule. All items are delivered on our regularly scheduled Benco trucks on orders of 30 gallons or more of strippers and/or finishes. Freight charges apply. Restrictions on semi-truck access should be discussed with our customer service department to reach a convenient delivery. Orders that need to be expedited, that cannot wait for the Benco truck schedule, can be shipped by common carrier. Common carrier rates will apply. These shipments will be prepaid only.

Smaller orders are shipped Federal Express ground only and/or United States Postal Service. These orders will be prepaid only.

International shipments require special handling. Call for assistance.

Notice: Methylene Chloride based products are for industrial use only. Use only in well ventilated area with proper protective equipment.

More Info

B15 is our most aggressive semi-paste stripper and essentially B17 in a semi-paste form for use where objects are too large to submerge in a tank. Use for large heavy industrial equipment stripping, large powder coated or epoxied appliances and other field-oriented applications where you must bring the stripping to the item. Also frequently used as an airplane or aircraft stripper where speed of removal is of primary importance.

  • DESCRIPTION
  • SPECIFICATION
  • CONTAINERS

DESCRIPTION

Benco B15

  • Semi-paste stripper for use on vertical surfaces and items too large for a dip tank system,
    non-flammable, water rinse.
  • Extremely aggressive stripping action on all coatings.
  • Effective on powder coat polyesters and nylons, catalyzed finishes, epoxies, electroplate as well as conventional paints.
  • Not for use on zinc or magnesium surfaces.
  • Apply by brush or roller. Can be sprayed with a high pressure stainless steel spray system.

SPECIFICATION

  • Specific Gravity—1.195 (9.97 lbs. / gal)
  • Percent Volatile—>95%
  • VOC Content—191 grams/liter      (1.59lbs./gal)
  • Boiling Point—104 degrees F
  • Freeze Point—Less than -40 F
  • Flash Point—N / A

CONTAINERS

Available in 5 and 55 gallon drums.

Benco trucks service more than 95% of cities in the 48 contiguous states. See our Truck Schedule. All items are delivered on our regularly scheduled Benco trucks on orders of 30 gallons or more of strippers and/or finishes. Freight charges apply. Restrictions on semi-truck access should be discussed with our customer service department to reach a convenient delivery. Orders that need to be expedited, that cannot wait for the Benco truck schedule, can be shipped by common carrier. Common carrier rates will apply. These shipments will be prepaid only.

Smaller orders are shipped Federal Express ground only and/or United States Postal Service. These orders will be prepaid only.

International shipments require special handling. Call for assistance.

Notice: Methylene Chloride based products are for industrial use only. Use only in well ventilated area with proper protective equipment.

More Info

B12 is our most popular aircraft stripper and better suited for more fragile metals like zinc, magnesium and delicate aluminum parts. It has a spray viscosity and can be plastic wrapped and left on overnight. B12 has also been proven effective in marine restoration for removing anti-fouling paints that are used below the water line on fiberglass hulls.

  • DESCRIPTION
  • SPECIFICATION
  • CONTAINERS

DESCRIPTION

Benco B12 (Preferred by Aircraft Strippers)

  • Semi-paste, non-flammable, water rinse.
  • Safe to use on most metal surfaces, including magnesium and zinc.
  • Rapidly strips polyurethanes and epoxies.
  • Long wet life and clings to vertical surfaces, spray-able viscosity.
  • Appropriate for aircraft.
  • Safety gear and proper ventilation necessary while using this product.

SPECIFICATION

  • Specific Gravity—1.95 (9.97 lbs. / gal)
  • Percent Volatile—>95%
  • VOC Content—175 grams/liter      (1.46lbs./gal)
  • Boiling Point—104 degrees F
  • Freeze Point—Less than -40 F
  • Flash Point—N / A

CONTAINERS

Available in 5 and 55 gallon drums.

Benco trucks service more than 95% of cities in the 48 contiguous states. See our Truck Schedule. All items are delivered on our regularly scheduled Benco trucks on orders of 30 gallons or more of strippers and/or finishes. Freight charges apply. Restrictions on semi-truck access should be discussed with our customer service department to reach a convenient delivery. Orders that need to be expedited, that cannot wait for the Benco truck schedule, can be shipped by common carrier. Common carrier rates will apply. These shipments will be prepaid only.

Smaller orders are shipped Federal Express ground only and/or United States Postal Service. These orders will be prepaid only.

International shipments require special handling. Call for assistance.

Notice: Methylene Chloride based products are for industrial use only. Use only in well ventilated area with proper protective equipment.

More Info

Sounds like a radio station but is actually our most aggressive non-MCL, ROOM TEMPERATURE, stripper. B96 is the alternative for B17 where state regulations or management prohibit use of MCL products.

  • DESCRIPTION
  • SPECIFICATION
  • CONTAINERS

DESCRIPTION

Benco B96

  • Liquid stripper.
  • Low evaporation rate.
  • Corrosive, most aggressive non-MCL stripper.
  • For use on conventional paints, polyurethanes, epoxies and powdercoat.
  • Appropriate for all metal surfaces.
  • Safety gear and proper ventilation necessary while using this product.

SPECIFICATION

  • Specific Gravity—1.01  (8.41 lbs. / gal)
  • Percent Volatile—>95%
  • VOC Content—15 grams/liter   (0.125 lbs / gal)
  • Vapor Pressure—.1mm Hg   
  • Boiling Point—219 degrees F
  • Freeze Point—Less than -30 F
  • Flash Point—>200 degrees F

CONTAINERS

Available in 5, 55 gallon drums and “Special Order” 275 gallon totes.

Benco trucks service more than 95% of cities in the 48 contiguous states. See our Truck Schedule. All items are delivered on our regularly scheduled Benco trucks on orders of 30 gallons or more of strippers and/or finishes. Freight charges apply. Restrictions on semi-truck access should be discussed with our customer service department to reach a convenient delivery. Orders that need to be expedited, that cannot wait for the Benco truck schedule, can be shipped by common carrier. Common carrier rates will apply. These shipments will be prepaid only.

Smaller orders are shipped Federal Express ground only and/or United States Postal Service. These orders will be prepaid only.

International shipments require special handling. Call for assistance.

More Info

A non-methylene chloride formula for use on coated metal finishes, architectural railings and aluminum windows. Can also be used for wood decks.

  • DESCRIPTION
  • SPECIFICATION
  • CONTAINERS

DESCRIPTION

Benco B95

  • Semi-paste.
  • Low evaporation rate.
  • Ideal aircraft stripper.
  • Slower acting than B14.
  • Appropriate for wood, metal, concrete & brick
  • Safety gear and proper ventilation necessary while using this product.

SPECIFICATION

  • Specific Gravity—1.01  (8.41 lbs. / gal)
  • Percent Volatile—>95%
  • VOC Content—0 grams/liter    
  • Boiling Point—219 degrees F
  • Freeze Point—Less than -30 F
  • Flash Point—>200 degrees F

CONTAINERS

Available in 5 and 55 gallon drums.

Benco trucks service more than 95% of cities in the 48 contiguous states. See our Truck Schedule. All items are delivered on our regularly scheduled Benco trucks on orders of 30 gallons or more of strippers and/or finishes. Freight charges apply. Restrictions on semi-truck access should be discussed with our customer service department to reach a convenient delivery. Orders that need to be expedited, that cannot wait for the Benco truck schedule, can be shipped by common carrier. Common carrier rates will apply. These shipments will be prepaid only.

Smaller orders are shipped Federal Express ground only and/or United States Postal Service. These orders will be prepaid only.

International shipments require special handling. Call for assistance.

 

More Info

B94 is the perfect stripper for those removing finishes from both wood and metal. It strips relatively quickly and is the best choice for those who cannot use a methylene chloride based product due to state regulations or environment. B94 is gentler than B96 for softer metals. Will still remove tough epoxies, polyurethane and paints but with longer stripping times required.

  • DESCRIPTION
  • SPECIFICATION
  • CONTAINERS

DESCRIPTION

Benco B94

  • Liquid stripper.
  • Low evaporation rate.
  • Less corrosive than B96, safer for softer metals.
  • For use on conventional paints, polyurethanes, and epoxies.  Slower acting than B17.
  • Appropriate for all metal surfaces.
  • Safety gear and proper ventilation necessary while using this product.

SPECIFICATION

CONTAINERS

Available in 5, 55 and “Special Order” 275 gallon totes.

Benco trucks service more than 95% of cities in the 48 contiguous states. See our Truck Schedule. All items are delivered on our regularly scheduled Benco trucks on orders of 30 gallons or more of strippers and/or finishes. Freight charges apply. Restrictions on semi-truck access should be discussed with our customer service department to reach a convenient delivery. Orders that need to be expedited, that cannot wait for the Benco truck schedule, can be shipped by common carrier. Common carrier rates will apply. These shipments will be prepaid only.

Smaller orders are shipped Federal Express ground only and/or United States Postal Service. These orders will be prepaid only.

International shipments require special handling. Call for assistance.

More Info

B17e Eco-Strip—our most powerful non-MCL stripper for auto rims. Strong enough to wear the B17 badge—the e stands for Eco-friendly and Economical. Made in the USA, B17e works best heated between 180-200 degrees removing finishes up to 3 X’s faster than our competition.  Use B17e to strip tough OEM finishes on anything you would normally use B17 for but may be prohibited due to individual state restrictions on methylene chloride. B17e is the fastest stripper for automotive wheels if you want a non-methylene chloride stripper.

Submersion in B17e will remove epoxies, polyurethanes, polyester coatings, electrocoat coatings, and non-catalyzed paints and coatings. B17e contains ingredients that have very low evaporation rates that provide formulation stability, allowing the product to be used extensively without performance deterioration. B17e is formulated with the highest quality virgin solvents, surfactants, and additives.

Call your Benco Customer Service Representative for details and pricing.

  • DESCRIPTION
  • SPECIFICATION
  • CONTAINERS
  • VIDEOS

DESCRIPTION

  • Non-corrosive to steel, aluminum or magnesium parts
  • Very thin liquid penetrates rapidly through finishes and into crevices
  • Heat to between 180-200 for optimal results
  • Average immersion time—15 minutes for silvers/clears-120 minutes for tough black euro coatings.
  • Keep submerged until all coatings are removed
  • Rinse with water for complete removal
  • Simply replenish as used
  • Proudly Made in America by American workers

SPECIFICATION

  • Specific Gravity—1.03
  • Percent Volatile—>100%
  • VOC Content—LVP exempt
  • Vapor Pressure— < 2mm Hg
  • Vapor Density— > 1.0
  • Boiling Point—189C
  • Freeze Point—Less than -40 F
  • Flash Point—93C
  • pH—10-12
  • Shelf Life—3 years when stored inside

CONTAINERS

Available in 55 gallon drums and 275 gallon totes.

Benco trucks service more than 95% of cities in the 48 contiguous states. See our Truck Schedule. All items are delivered on our regularly scheduled Benco trucks on orders of 30 gallons or more of strippers and/or finishes. Freight charges apply. Restrictions on semi-truck access should be discussed with our customer service department to reach a convenient delivery. Orders that need to be expedited, that cannot wait for the Benco truck schedule, can be shipped by common carrier. Common carrier rates will apply. These shipments will be prepaid only.

Smaller orders are shipped Federal Express ground only and/or United States Postal Service. These orders will be prepaid only.

International shipments require special handling. Call for assistance.

VIDEOS

*NMP is an active ingredient found in most non-methylene-chloride strippers and is known to cause birth defects.
B17e does NOT use NMP and is methylene-chloride free.

More Info

B12L is a liquid version of B12 our most popular aircraft stripper which is good for use on fragile metals like zinc, magnesium and delicate aluminum parts.

  • DESCRIPTION
  • SPECIFICATION
  • CONTAINERS

DESCRIPTION

Benco B12 L

  • Liquid, non-flammable, water rinse.
  • Use for small parts that can be immersed in liquid.
  • Safe for use on most metal surfaces, including magnesium and zinc.
  • Rapidly strips polyurethanes and epoxies.
  • Liquid penetrates small crevices and corners for full removal of coatings.
  • Safety gear and proper ventilation necessary while using this product.

SPECIFICATION

  • Specific Gravity—1.95 (9.97 lbs. / gal)
  • Percent Volatile—>95%
  • VOC Content—175 grams/liter      (1.46lbs./gal)
  • Boiling Point—104 degrees F
  • Freeze Point—Less than -40 F
  • Flash Point—N / A

CONTAINERS

Available in 55 gallon drums and “Special Order” 275 gallon totes.

Benco trucks service more than 95% of cities in the 48 contiguous states. See our Truck Schedule. All items are delivered on our regularly scheduled Benco trucks on orders of 30 gallons or more of strippers and/or finishes. Freight charges apply. Restrictions on semi-truck access should be discussed with our customer service department to reach a convenient delivery. Orders that need to be expedited, that cannot wait for the Benco truck schedule, can be shipped by common carrier. Common carrier rates will apply. These shipments will be prepaid only.

Smaller orders are shipped Federal Express ground only and/or United States Postal Service. These orders will be prepaid only.

International shipments require special handling. Call for assistance.

Notice: Methylene Chloride based products are for industrial use only. Use only in well ventilated area with proper protective equipment.

BSI Companies | Benco Sales, Inc. | Besway Systems
123 Stout Drive, Crossville, TN 38555

Phone: 931.484.9578
Fax: 931.484.7614
Download Print Catalog
MENU