Benco B20
B20 is our mildest stripper and is an excellent choice for all-around cleaning of fine finishes. Often used to strip Brass or Copper pieces.
Liquid stripper, MEK/Acetone, flammable.
Capable of stripping many finishes.
Strips shellacs, varnishes, lacquers, and polyurethanes.
Apply by pouring or flowing over the surface or by immersion.
B20 is our mildest stripper and is an excellent choice for all-around cleaning of fine finishes. Often used to strip Brass or Copper pieces.
Liquid stripper, MEK/Acetone, flammable.
Capable of stripping many finishes.
Strips shellacs, varnishes, lacquers, and polyurethanes.
Apply by pouring or flowing over the surface or by immersion.
B20 is our mildest stripper and is an excellent choice for all-around cleaning of fine finishes. Often used to strip Brass or Copper pieces.
Liquid stripper, MEK/Acetone, flammable.
Capable of stripping many finishes.
Strips shellacs, varnishes, lacquers, and polyurethanes.
Apply by pouring or flowing over the surface or by immersion.
SPECIFICATION
Specific Gravity—0.83 (6.92 lbs. / gal)
Percent Volatile—>95%
VOC Content—550 grams/liter (5.59lbs./gal)
Boiling Point—131 degrees F
Freeze Point—Less than -0 F
Flash Point—15 degrees F
CONTAINERS
Available in 5 and 55 gallon drums.
SHIPPING
Products are shipped by common carrier. Flat rate shipping minimums for 30 gallons or more. Additional fees will apply airports, residential, limited, etc.
Smaller orders are shipped by Federal Express ground only and/or the United States Postal Service. These orders will be prepaid only.
International shipments require special handling. Call for assistance.
Notice: Methylene Chloride based products are for industrial use only. Use only in well-ventilated areas with proper protective equipment.